8.19. The wing is forward

The wing represents an all-metal detail with two welded arms and the amplifier. The wing fastens in eleven points and can be removed for repair and replacement.

Removal of a forward wing

Fig. 329. Facing of a radiator: 1 – panel of facing of a radiator; 2 – flange nuts; 3, 14 – the self-cutting screws; 4, 8, 11, 15 – washers; 5 – facings of headlights; 6 – front grille; 7 – nut; 9 – factory sign; 10 – bolts; 12 – average arm of fastening of the panel of facing of a radiator; 13 – right arm of fastening of the panel of facing of a radiator


1. Unscrew the screw 3 (see fig. 329) connections of a wing with facing of 1 radiator.
2. Turn off a bolt of the 10th fastening of a wing to an arm of the 13th facing of 1 radiator.

Fig. 330. Forward wings and aprons of wheels: 1, 4 – bolts; 2, 5, 13 – washers; 3 – wing; 6, 9 – arms; 7 – the self-cutting screw; 8 – flange nut; 10, 12 – nuts; 11 – forward apron; 14 – back apron; 15 – the amplifier of a wing (it is welded on a wing)


3. Unscrew the screw 7 (fig. 330) of fastening of a wing to the lower arm of the 9th wing.
4. Turn off bolts 4 fastenings of an apron to a wing and an arm 6.
5. Unscrew two screws 7 of fastening of the amplifier 15 of a wing to a car body.
6. Turn off two bolts of 1 fastening of a wing to a car body.
7. Unscrew three screws 7 of fastening of a wing to a body of the car and remove a wing.
You carry out installation of a forward wing upside-down.

Removal and installation of aprons of wheels
For removal of aprons turn off bolts 4 (see fig. 330) their fastenings: eight (on four from each party) – for forward aprons, six (on three from each party) – for back aprons.