8.15. Front bumper and protection

The front bumper is a metal framework with the rubber and plastic slips established on it.
The front bumper is fixed on a frame by four bolts and can be removed for repair and replacement.

Removal of a front bumper

Fig. 326. Installation of a forward protection: 1 – forward protection; 2, 3 – rubber slips;
4 – nuts; 5 – washers; 6 – bolt; 7 – spring washer


1. Turn off four bolts of 6 (fig. 326) of fastening of a forward protection 1.
2. If necessary turn off a nut 4 and separate rubber slips 3 and 2.

Fig. 327. Forward and back bumpers, fastening of registration plates: 1 – lattice of a front bumper; 2, 10, 15, 17, 20, 23, 33, 35 – washers elastic; 3, 5, 25, 27 – screws; 4 – facing of the top slip; 6 – the slip is top; 7 – the slip is side right; 8 – the nut is flange; 9, 14, 21, 22 – nuts; 11, 18, 32,
36 – bolts; 12, 24, 28 – washers; 13 – bandage; 16 – the arm is left; 19 – framework of a front bumper; 26 – slip rubber; 29 – overlay of a footboard;
30 – fastening plug; 31 – cap; 34 – rear bumper; 37 – the slip is left; And – a facing latch 4 top slips and overlays of the 29th footboard; B – short moustaches of a bandage 13 and overlays of the 26th front bumper


3. Turn off four nuts of 14 (fig. 327) of fastening of a bumper to an arm 16 and remove a bumper.
4. If necessary turn off four bolts of the 18th fastening of arms 16 and remove arms.

Dismantling of a front bumper
1. Unscrew three screws 3 fastenings of a lattice of 1 bumper and remove a lattice.
2. Unscrew two screws 25 and remove registration plate.
3. Unbend short moustaches of B of a rubber slip 26 and remove a slip.
4. Unbend short moustaches of B of a bandage 13 and remove a bandage.
5. Turn off six bolts of fastening of side plastic slips 7 and remove slips.
6. Unscrew two screws 5. Remove the top slip 6 together with facing 4, previously having drowned four rubber latches And facings.
7. Remove facing 4 from a slip 6, having drowned three rubber latches And.
You carry out installation of a bumper upside-down.