8.14. Footboards

Removal and installation of a folding footboard of a back
You carry out removal of a folding footboard of a back in the following order:

Fig. 325. Footboards: 1 – forward overlay of the right footboard; 2 – average overlay of the right footboard; 3 – screw; 4, 16, 19, 21 – washers; 5 – back overlay of the right footboard; 6, 11 – axes; 7 – forelock; 8 – bolt; 9 – folding footboard; 10 – finger; 12 – clip of overlays of a footboard; 13 – arm; 14, 17, 23 – nuts; 15, 18, 22 – spring washers; 20 – shock-absorber; 24 – overlay of a folding leg


1. Turn off a nut of 23 (fig. 325), remove from axis 11 of a washer 21 and 22, take out the 13th axis 11 from an arm.
2. Turn off a nut 17, remove from axis 6 of a washer 18 and 19, supporting by a hand a folding footboard 9; take out the 13th axis 6 from an arm.
3. Take out the forelock 7 of a finger 10, remove a washer 16 and take out a finger 10 of a fork of a folding footboard 9, supporting by a hand the shock-absorber 20.
At violation of a form or damage of a rubber slip 24 replace it new.
You carry out installation of a folding footboard upside-down.
Side footboard
At deformation of slips 1, 2 and 5 (see fig. 325) footboards remove them, straighten and again establish. For removal of slips it is necessary to unscrew fifteen screws 3 (four screws of fastening of clips 12, three screws of fastening of an average slip 2, five – a lobby 1 and three – back 5).
At violation of a form or damage of slips replace them new.
At violation of a paint and varnish covering of a clip of 12 overlays of a footboard remove a clip, having unscrewed two screws 3, restore a covering and again establish.