1.9.2. Car lubricant


Fig. 13. Scheme of lubricant and gas station of the car


Durable and trouble-free operation of the car to a large extent depends on timely replacement of oil and lubricant in units and knots.
Exact implementation of all indications of the present manual on lubricant of the car is obligatory. The name of lubricants and frequency of their replenishment or replacement are specified in tab. 1.
During the day after overcoming the ford check a condition of oil in all units. If in oil water is found, replace oil in this unit. It is also necessary to grease through press-butterdishes all points of service of the chassis up to one expression fresher than lubricant.
When carrying out lubricant ope-ration observe the following requirements:
1. Merge oil from the engine and units of transmission at its replacement at once after a car stop when units are heated-up.
2. Carefully delete dirt from press-butterdishes and traffic jams before producing lubricant to avoid penetration of dirt into car mechanisms.
3. Carefully delete the acted or flowed out lubricant from all details.
4. Wash out cases before filling of fresh oil if oil in cases of the engine and units of transmission is strongly polluted or in it metal particles are noticed.
5. Mixing of Litol-24 lubricant with the lubricant of Litas replacing it is allowed in any proportions. At use of other substitutes wash out knot kerosene.
If after long operation in oil there were metal particles, open the unit, examine and replace worn-out details.